Type | Power |
Power Assisted | Yes |
Total Turns Lock To Lock | 3.375 |
Output Shaft Spline Quantity | 32 |
Input Shaft Spline Quantity | 25 |
Output Shaft Diameter | 1.25 |
Input Shaft Diameter | 19.99 |
Mounting Hardware Included | No |
Output Shaft Thread Diameter | 21.95 |
Prop 65 | NO |
SDS Required | No |
E-Waste | No |
Hose Port Type | O-Ring |
Number of Mounting Holes | 4 |
Input Shaft Diameter (mm) | 19.99 |
Pump Rotation | Standard |
Pitman Arm Included | No |
Input Shaft Diameter (in) | 0.787 |
Output Shaft Diameter (in) | 0.864 |
Input Shaft Spline Count | 25 |
Steering Box Type | Power |
Input Shaft Type | Splined;Single Flat |
Package Contents | Gear; Instruction Sheet; Instruction tag; Sealing Kit |
Pressure Port Thread Size | 18x1.5 |
Return Port Thread Size | 16x1.5 |
Splined Input Shaft | Yes |
Output Shaft Diameter (mm) | 21.95 |
Color | Black |
Product Condition | New |
Is or contains a battery? | No |
Is or contains a bulb? | No |
Contains Electronic Components? | No |
Is the item CARB affected? | No |
Is item a chemical? | No |
FAA_A1 | Hoses should be replaced if they appear brittle or if there are any kinks or leaks. |
FAA_A4 | Not recommended. The preload is adjusted at the time of assembly. If excessive play is present, its due to wear of internal components. If adjustment is attempted, it could lead to binding. |
FAQ_Q2 | What is the difference between a fast ratio and a slow ratio gear box? |
FAQ_Q1 | Should the power steering hoses be replaced? |
FAA_A3 | In a standard rotation gear box, the input and pitman shaft rotate in the same direction. The shafts turn in opposite directions on a reverse rotation gear box. |
FAQ_Q4 | Can I adjust my original gear box if it has a lot of play? |
FAA_A2 | The difference is the orientation of the teeth on the pitman shaft and power piston. Variable teeth will have a faster ratio than non-variable teeth. |
FAQ_Q3 | How can I tell if my gear box is a standard or reverse rotation? |
Part Terminology | Steering Gear |