Product Features Repairs metal leaks in evaporators, condensers, compressors, accumulators, and receiver dryers Contains leak sealer to seal common A/C leaks in rubber hoses, gaskets, and O-rings Helps eliminate harmful moisture For use in vehicles with R-134a compatible A/C systems Includes reusable charging hose and self-sealing valve to piercing gauge adapter Usage Directions 1. Turn the valve handle of the recharge hose counterclockwise until the piercing stem is in the up position. This will prevent accidental piercing of the Super Seal can. CAUTION: Do not add Super Seal through a manifold gauge and hose set. Use only enclosed recharge hose. 2. Shake can well. Screw the recharge hose onto the top of the Super Seal can. 3. Locate the low-side service port of the vehicle's air conditioner and remove the protective cap. 4. Attach the quick-connect fitting on the recharge hose to the service port by pulling the connector ring back as you push the fitting onto the service port. Make sure the fitting is tight. DO NOT CONNECT TO THE HIGH-SIDE SERVICE PORT AS THE PRESSURE MAY CAUSE THE CAN TO BURST, RESULTING IN SERIOUS INJURY! 5. Start the engine and turn the air conditioner to maximum cooling. Make sure the compressor is running. If compressor is not running, add a maximum of one can of refrigerant. Repairs are necessary if compressor still does not run. 6. Turn the valve handle of the recharge hose clockwise until the piercing stem has punctured the Super Seal can. 7. Turn valve handle counterclockwise until you hear Super Seal leaving the can. 8. Hold the Super Seal can in an upside-down position until the can is empty. 9. Disconnect the recharge hose from the low-side service port. Remove the Super Seal can from the recharge hose and discard. Turn the valve handle of the recharge hose counterclockwise until the piercing stem is in the up position. 10. Immediately add additional refrigerant to fully charge the system. This prevents Super Seal residue from

One application of oil and fuel system UV leak detection dye

Contains approximately 1 Quart of Flush & Clean formula

Contains approximately 8.5 oz. PAG refrigerant oil and O-ring conditioner.

CERT301CA-1 | Certified AC Pro R-134a Refrigerant, CA Product Features Approved for use in California Contains approximately 12 oz. of R-134a For use in vehicles with R-134a compatible A/C systems EPA compliant self-sealing valve closes when the dispenser is disconnected (requires adapter or EPA compliant hose) Replaces lost R-134a refrigerant

Reusable R-134a hose

Low viscosity PAG oil for R-134a auto A/C systems;ISO 46 viscosity

Professional R-134a manifold gauge and hose set used to check both low- and high-side pressures while adding refrigerant

Medium viscosity PAG oil for R-134a auto A/C systems; ISO 100 viscosity

One application of oil and fuel system UV leak detection dye

Safe for use in all vehicle makes and models (except 1996 and newer GM models that use DEXCOOL coolant)

Low viscosity PAG oil for R-1234yf auto A/C systems Meets OEM specifications